-
A universal hydro cooling system for any type of miners including MicroBt Whatsminer M53 and Bitmain Hydro models
-
Rated cooling capacity from 300 to 1200 kW enabling hosting from 50 to 230 hydro miners per single CDU system
-
Full condensation control: CDU’s maintain the temperature below the dew point protecting the precious electronics from condensation
-
Dual loop system: effective separation of the facility circuit and secondary circuit protects the miners from fouling & ensures proper cooling fluid maintenance
-
Cooling fluid protection: proven procedures and solutions to maintain fluid quality and prevent bio-fouling, galvanic corrosion, and scale deposit accumulation
-
Redundant pumps and other components to ensure that the cooling system remains operational
DCX HYDRO100 Rack
Hydro miners rely entirely on the effectiveness and continuous operation of the liquid cooling system. Cheap “water cooling cabinets” offered by cryptominer resellers are risky choice and may ruin your miners. This is precisely why we developed DCX HYDRO100 CDU System. It features dual high-quality smart pumps that can be controlled remotely installed in 42U datacenter rack frame. Pumps can operate in redundancy mode or at full capacity transferring over 160kW of heat. System is fully universal accommodating either 10-12 MicroBt M56S++ Whatsminers or 20 or even 30 Bitmain Hydro miners or even standard servers, which gives users great flexibility.
Get the SpecsheetSee More![](https://dcx.eu/wp-content/uploads/HR100-2.png)
![](https://dcx.eu/wp-content/uploads/DCX-HYDRO200_1-2.png)
DCX HYDRO200 Rack
Hydro miners rely entirely on the effectiveness and continuous operation of the liquid cooling system. Cheap “water cooling cabinets” offered by cryptominer resellers are risky choice and may ruin your miners. This is precisely why we developed DCX HYDRO100 CDU System. It features dual high-quality smart pumps that can be controlled remotely installed in 42U datacenter rack frame. Pumps can operate in redundancy mode or at full capacity transferring over 160kW of heat. System is fully universal accommodating either 10-12 MicroBt M56S++ Whatsminers or 20 or even 30 Bitmain Hydro miners or even standard servers, which gives users great flexibility.
Get the SpecsheetSee More![](https://dcx.eu/wp-content/uploads/perfect_0-1.png)
DCX HYDRO Mining Container 20
A complete Antminer Hydro Cooling System. Our standard ICP15 adaptive dry cooler with controller firmware update to control dew point which can support Whatsminer M53 series, Bitmain S19 Hydro miners or standard miners with added water cooling coldplates. Can be delivered with manifold and cooling fluids. A working solution to upgrade current Antminers into the hydro model or utilize affordable hydro miner series at small, home-scale. This kit will support up to 40kW of heat transfer from your miners.
HCS 15 is an Industrial dry cooler combined with integrated pump and adaptive fan control. Provides 15 kW of Heat Transfer at 35°C and 25 kW of Heat Transfer at 25°C. A complete solution, replacing dry cooler and a separate pump group. Over 3 times more effective than simple machine oil coolers. Equipped with adaptive fan controller which controls the speed of the fans, so they operate as silent as possible. HCS 15 may be combined with heat reuse loop and is ideally sized for home mining operations.
Get the SpecsheetSee More
DCX HYDRO Mining Container 40
A complete Antminer Hydro Cooling System. Our standard ICP40 adaptive dry cooler with controller firmware update to control dew point which can support Whatsminer M53 series, Bitmain S19 Hydro miners or standard miners with added water cooling coldplates. Can be delivered with manifold and cooling fluids. A working solution to upgrade current Antminers into the hydro model or utilize affordable hydro miner series at small, home-scale. This kit will support up to 40kW of heat transfer from your miners.
ICP 40 is an Industrial dry cooler combined with integrated pump and adaptive fan control. Provides 40 kW of Heat Transfer at 35°C and 45 kW of Heat Transfer at 25°C. A complete solution, replacing dry cooler and a separate pump group. Over 3 times more effective than simple machine oil coolers. Equipped with adaptive fan controller which controls the speed of the fans, so they operate as silent as possible. ICP 15 may be combined with heat reuse loop and is ideally sized for home mining operations.
Get the SpecsheetSee More
![](https://dcx.eu/wp-content/uploads/pp.png)
![](https://dcx.eu/wp-content/uploads/we-1.png)
DCX HYDRO COOLING SYSTEM HCS 40
A complete Antminer Hydro Cooling System. Our standard ICP40 adaptive dry cooler with controller firmware update to control dew point which can support Whatsminer M53 series, Bitmain S19 Hydro miners or standard miners with added water cooling coldplates. Can be delivered with manifold and cooling fluids. A working solution to upgrade current Antminers into the hydro model or utilize affordable hydro miner series at small, home-scale. This kit will support up to 40kW of heat transfer from your miners.
ICP 40 is an Industrial dry cooler combined with integrated pump and adaptive fan control. Provides 40 kW of Heat Transfer at 35°C and 45 kW of Heat Transfer at 25°C. A complete solution, replacing dry cooler and a separate pump group. Over 3 times more effective than simple machine oil coolers. Equipped with adaptive fan controller which controls the speed of the fans, so they operate as silent as possible. ICP 15 may be combined with heat reuse loop and is ideally sized for home mining operations.
Get the SpecsheetSee More
HYDRO COOLING SYSTEM HCS 15
A complete Antminer Hydro Cooling System. Our standard ICP15 adaptive dry cooler with controller firmware update to control dew point which can support Whatsminer M53 series, Bitmain S19 Hydro miners or standard miners with added water cooling coldplates. Can be delivered with manifold and cooling fluids. A working solution to upgrade current Antminers into the hydro model or utilize affordable hydro miner series at small, home-scale. This kit will support up to 40kW of heat transfer from your miners.
HCS 15 is an Industrial dry cooler combined with integrated pump and adaptive fan control. Provides 15 kW of Heat Transfer at 35°C and 25 kW of Heat Transfer at 25°C. A complete solution, replacing dry cooler and a separate pump group. Over 3 times more effective than simple machine oil coolers. Equipped with adaptive fan controller which controls the speed of the fans, so they operate as silent as possible. HCS 15 may be combined with heat reuse loop and is ideally sized for home mining operations.
Get the SpecsheetSee More
![](https://dcx.eu/wp-content/uploads/HCS15_fin-1.png)